InSaNe Audio

 

JL3001 Video Installaion Guide

This is intended to be a simple, step-by-step video guide for installing Insane Audio's super awesome JL3001 in a 2018 or newer Jeep Wrangler JL or Gladiator Pickup. Installation time is approximately 15 to 30min.

Remember, all Insane Audio customers get lifetime technical support. Our support staff works 7 days a week and is always happy to help. Should you have any questions about installing your Insane Audio product or how to use it please hit us up anytime at www.insaneaudio.com/support

 

SAFETY PRECAUTIONS

Disconnect the negative battery terminal before beginning this installation!

If you are not comfortable installing this product yourself, we highly recommend consulting a professional installer.

Don’t run with scissors.

 

 

INTRODUCTION

If you have difficulty viewing the embedded video, you can download it HERE (right click, save as)

 

 

Removing the Center Dash Bezel

If you have difficulty viewing the embedded video, you can download it HERE (right click, save as)

 

 

Removing the OEM Radio Bezel Screws

If you have difficulty viewing the embedded video, you can download it HERE (right click, save as)

 

 

Removing the OEM Radio Bezel

If you have difficulty viewing the embedded video, you can download it HERE (right click, save as)

 

 

Removing the OEM Radio Screws

If you have difficulty viewing the embedded video, you can download it HERE (right click, save as)

 

 

Removing the OEM Radio

If you have difficulty viewing the embedded video, you can download it HERE (right click, save as)

 

 

Transferring Pressure Clips to your JL3001

If you have difficulty viewing the embedded video, you can download it HERE (right click, save as)

 

 

Installing the GPS Antenna

If you have difficulty viewing the embedded video, you can download it HERE (right click, save as)

 

 

Installing WiFi Antenna

If you have difficulty viewing the embedded video, you can download it HERE (right click, save as)

 

 

Installing the AM/FM Radio Adapter

If you have difficulty viewing the embedded video, you can download it HERE (right click, save as)

 

 

External Microphone

If you have difficulty viewing the embedded video, you can download it HERE (right click, save as)

 

 

HDMI Cable

If you have difficulty viewing the embedded video, you can download it HERE (right click, save as)

 

 

USB Cables Part 1

If you have difficulty viewing the embedded video, you can download it HERE (right click, save as)

IMPORTANT NOTE: We are aware of an issue where some OEM USB ports do not support adequate data speeds for Apple CarPlay. If you are an iPhone user and are having difficulties with CarPlay through your OEM USB port, you should note that Insane Audio has provided a bypass cable in the box that you can use to bypass your OEM port and wire to the glovebox. This can be used for Apple CarPlay. Reach out to Insane Audio technical support for more information.

 

 

USB Cables Part 2

If you have difficulty viewing the embedded video, you can download it HERE (right click, save as)

 

 

USB Cables Part 3

If you have difficulty viewing the embedded video, you can download it HERE (right click, save as)

 

 

Retaining your OEM Backup Camera

If you have difficulty viewing the embedded video, you can download it HERE (right click, save as)

 

 

Retaining your OEM Backup Camera Part 2

If you have difficulty viewing the embedded video, you can download it HERE (right click, save as)

 

 

Retaining your OEM AUX Plug

If you have difficulty viewing the embedded video, you can download it HERE (right click, save as)

 

 

Final Connection

If you have difficulty viewing the embedded video, you can download it HERE (right click, save as)

NOTE FOR USERS WITH OEM PREMIUM SOUND SYSTEM: If you have the factory premium sound system (with subwoofer), you will need to make one additional change on your main wiring harness. There are quick connects on the speaker wires labeled F1/F2 and R1/R2. Connect F1 to R2 and F2 to R1. If you do not have the factory premium sound system with subwoofer, just leve F1 to F2 and R1 to R2.

Users with the factory premium sound system (with subwoofer) will also need to make a setting change when the system is installed. Under factory settings (126) -> CanBus -> Amplifier you need to change this to "with amplifier". Reach out to Insane Audio technical support if you require additional assistance.

 

Mounting your JL3001

If you have difficulty viewing the embedded video, you can download it HERE (right click, save as)

 

 

Replacing your Center Dash Bezel

If you have difficulty viewing the embedded video, you can download it HERE (right click, save as)

 

 

Peel off the Screen Protector

If you have difficulty viewing the embedded video, you can download it HERE (right click, save as)

 

 

Installing the OBDII Dongle

If you have difficulty viewing the embedded video, you can download it HERE (right click, save as)

 

 

Wrapping Up

If you have difficulty viewing the embedded video, you can download it HERE (right click, save as)